| 1:14 PM EST

2015 Mustang: Lifting the Hood

Obligatory 2015 Mustang shot.
#Ford #HP

Share

Facebook Share Icon LinkedIn Share Icon Twitter Share Icon Share by EMail icon Print Icon

�

Obligatory 2015 Mustang shot. Moray Callum, Ford executive director, Design, The Americas: “You only get one chance to make a first impression, and when you see this car you immediately see a Mustang strong and true.”

 

Although you have undoubtedly seen as many pictures as you could possibly want of the forthcoming 2015 Ford Mustang (and we’re including our obligatory shot here, too), what there has been less attention to is what can be found under the hood.

One of the more surprising things is a 2.3-liter EcoBoost engine. 2.3 liter? Even Scott Makowski, EcoBoost powertrain engineering manager admitted, “This EcoBoost engine might be small in displacement”—yes—“but it delivers where a Mustang driver expects it with a broad, flat torque curve and great drivability under any conditions.” It provides output of an estimated 305 hp and 300 lb-ft of torque.

The 2.3 features direct fuel injection, twin independent variable camshaft timing, and turbocharging. It is the first Ford engine with a low-inertia, twin-scroll turbocharger. The cylinder head has an integrated exhaust manifold that separates the inner and outer pairs of cylinders into each inlet passage to the turbo. This arrangement keeps the exhaust pulses separated from the next cylinder in the firing order so that there aren’t any mixing losses and there is maximized pulse energy to the turbine wheel, which means quicker torque delivery, similar to a twin-turbocharger setup. (Note: this is a twin-scroll turbocharger, not a pair of turbochargers.) In addition to the performance benefit (this is, after all, an engine for a Mustang), there is a gain in fuel efficiency, too (this is, after all, the Age of Fuel Economy): because the exhaust valves are separated, they can stay open longer, which means reduced pumping losses, which can improve specific fuel consumption by approximately 1%.

Other features of the 2.3-liter four are a forged-steel crankshaft, piston-cooling jets, steel piston ring carriers, premium bearing and valve seat materials, forged-steel connecting rods, high-pressure die-cast aluminum cylinder block, and a deep-sump die-cast aluminum oil pan.

Yes, there is also a 5.0-liter V8 for the 2015 Mustang that will produce more than 420 hp and 390 lb-ft of torque. This is, after all, a Mustang.

Related Topics

RELATED CONTENT

  • The BMW i3: Deconstructed

    The engineers at Munro & Associates have taken a perfectly sound BMW i3 and taken it apart. Completely apart. And they are impressed with what they’ve discovered about how the EV is engineered.

  • 2015 Jeep Wrangler Willys Wheeler

    The thing about the Wrangler Willys Wheeler: It is a toy for a grown-up boy.

  • 2017 Mazda CX-5 Grand Touring AWD

    The Mazda CX-5 first appeared on the scene in 2012, and for 2017, the vehicle has undergone some major transformations, to enhance what was already a notable small crossover.