How General Motors Develops World-Class Propulsion Systems
Dan Nicholson is vice president of General Motors Global Propulsion Systems, the organization that had been “GM Powertrain” for 24 years. Then the company recognized the fact that it is doing a whole lot more than combustion engines and step-gear transmissions, things like the battery systems and controls for vehicles including the Chevy Volt and Chevy Bolt, things like fuel-cell development (GM and Honda are working collaboratively on this).
Nicholson has had a wide, propulsion-system centric career at GM (though he was vp of Quality at one point). He’s worked on engines, controllers, software, calibration, testing, etc. He’s worked in China, Europe and the U.S.
One of the things he’s particularly proud of is having served as chief engineer for the renowned LS7 engine (a 7.0-liter V8 that produces 505 hp and that has found its way under the hoods of many really fast Corvettes and Camaros).
And because the GM Performance and Racing Center has now setup shop at the Global Propulsion Systems Engineering Center in Pontiac, Michigan, Nicolson brings along another high-performance engine to the studio of “Autoline After Hours,” the C7R racing engine. This is a 5.5-liter V8 that produces 500 hp and 510 hp. This particular engine will be making its way to Long Beach for the IMSA race there in April.
Because of the wide-ranging nature of what GM Propulsion Systems is addressing, Nicholson spends essentially the entire show with John McElroy, Bill Visnic of SAE International and me on this episode.
Topics range from electrification to combustion, from why there needs to be closer cooperation between oil companies and automakers in order to address CAFE requirements to how they’re recruiting at college campuses to get the kind and caliber of people they need to advance the technology.
After Nicholson leaves the set McElroy, Visnic and I discuss a variety of subjects, including why having fewer models on offer may be more efficient for OEMs to the recent results from the J.D. Power Vehicle Dependability Study.
And you can see it all here:
The Kia Stinger was a finalist for the 2018 North American International Car of the Year Awards.
Plenty of interior components are injection molded. But some companies—such as VW—are using a process for trim pieces that both mold a component and cover it in fabric in a single molding process. And it is coming to the U.S. in the not-too-distant future.
Ram Truck chief exterior designer Joe Dehner talks about how they’ve developed the all-new pickup. “We’ve been building trucks for over 100 years,” he says. “Best I could come up with is that this is our 15th-generation truck.”